* Each Feedback for your purchase yield a chance for winning the lucky draw
* Rebate US$ 1.00 for each Feedback
Search Result: 12857 records

Category

Country / Region

Sorting

RT0959  Mazinger Z on Flying
RT0959 Mazinger Z on Flying
(9.9)

Wooo-Hoo! Look at that robot! Gigantic wingspan, great pose and that "special, slightly enlarged" arm and fist. Great details overall (especially on face and pilot aircraft). Every part is "there" (I just checked) and nothing came bent or broken. Another GOOD JOB by the packaging staff.

Image


Alex

RT1328  R-Type R-9A
RT1328 R-Type R-9A
(9.3)

Wow, the little ship from my all-time favorite Coin-Op as a nifty resin kit. How cool is that? The parts look perfect, I fear assembly will be a lot like assembling a jigsaw puzzle, but I'll manage (I think). One question remains: How to put electric lights into the perfectly transparent sphere - I don't know whether drilling holes into that will damage the material...

Image


Alex (Germany

RT0724 1/100 The Empress Flame
RT0724 The Empress Flame
(9.3)

I just receved "The Empress Flame" from e2046. I love to buy FSS kits from E2046 because the quality is always COOL especially pre-order kit. Thanks for e2046's good work again. Now I got total 3 types of "The Empress Flame " kits. This one (Volks mm version) is best. It has really cool proportion and detail. I hardly recommend this kit to FSS fan. P.S. Thanks for Customer Feedback Lucky Draw prize.

Image


bsjang

RT1328  R-Type R-9A
RT1328 R-Type R-9A
(9.3)

Order #8370 RT1328 R-Type R-9A Wow! Great detail in a small ship. Just the right size I'd say. Controlling parts is kind of difficult with the photocoppied digital image, but it seems nothing is missing (I'll get back to you when I build it ) The clear parts are solid clear resin! Should make excellent effects, once I find out how to paint them best...

Image


SabZero (PRT)

RT1327  Getter 2
RT1327 Getter 2
(9.7)

An EXCELLENT sculpt and cast. Sharp details everywhere. Great bonus: It can be assembled in battle-stance or emerging from the ground. I guess, Fabian will settle for the latter variation. Will eat less shelf space. Now we need a Getter Poseidon to accompany this great figure.

Image


Alex

RT1319 1/100 MS-06FZ Zaku FZ Conversion Kit
RT1319 MS-06FZ Zaku FZ Conversion Kit
(9.9)

can sum this up really quickly: If you like Zakus, you MUST get this conversion. Look at the price and the number of parts. Totally worth every penny. Since it's a recast of a B-Club, you know you won't be disappointed. My favorite parts, the axe and machine gun, really make this a winner. The resin looks good, as does the detail. You CAN'T go wrong!

Image


baxojayz (USA)

RT1046 1/100 Machine Mess AUGE
RT1046 Machine Mess AUGE
(9.9)

After wanting this product for quite some time, I pre-ordered, and luckily, it was shipped to me. The casting is very good.. for the mostpart. There are some faded areas, such as the small tendrils under the shoulders. Some panels aren't as sharp as they could be, but in all honesty, this is one great casting. I still see the red marks from the mould on my kit. However, there are a few problems, some of them briefly mentioned above. However, one of the larger parts of the shoulders had what looked to be a chipped/broken part. I quickly contacted Chun and e2046.com service about this, and was HIGHLY dissapointed to learn that the workshop (not '46) refused to replace this part because of a bad mould. In my opinion, a bad mould should not even SEE production, and they had the audacity to send me a flawed part and refuse to replace it. In brief, I am -satisfied- with my kit. There are holes pre-drilled and ready for pinning, with notches and locking tabs ready to test fit quite easily. Most of the parts carry very sharp detail, and look to be an original. Especially where it matters - the back of the legs, the torso etc. The runes/ lettering on the helm is a bit faded, but nonetheless, they are noticeable. The kit was well packaged - thank you e2046 - but unlike the rest of my orders, this did not come in tupperware -but I guess that it was due to the size.

Image


Vincent Valentine (CAN)

RT1323 1/100 MH Phantom
RT1323 MH Phantom
(8.8)

Well, I was very happy to recieve this kit, and most of the parts are superb in terms of casting. There are, as always, a share of imperfections on them. Such as a bit of crud in the recessed details in areas such as the legs. The lower torso and groin are very well casted. The horns that go on the helm have a small bit of misalignment problem. A very good recast, however, there are two dissapointing parts. Part 70 - the ribbons, and part 7 - the upper torso. The upper torso had thin parts, simply caused by large bubbles trying to surface, but never making it to the top. There are also deformities, where the recasters cut the part from the sprue - a big gouge exists. As well, at the front of the torso, only three of the four recesses have been successfully recasted. e2046.com said that they would replace this one part. As for part 70, the workshop feels as though there is no problem. And I? I feel as if this were a load of crock. The ribbons are smothery on their edges, their hinges, misaligned. They have bubbles, and one of the rubbons is shorter than all of the rest. That, and it suffers from a bad mould that allowed resin to leak between the natural seams at the joining of the ribbons, making it look like a small puddle of resin. Although this may be over-anal, after seeing my friend's original Phantom and holding very high standards for workshops that claim to put fourth High Quality Recasts - my last order (8407 and this) seems to go against the trend a bit. Yes, yes. There are some excellent parts which rival the original's casting. But then, once in a while, you find a dud in the pile, which doesn't seem to be even casted by the same workshop. And oh, then they refuse to replace the damned part. I much respect the fast and helpful customer service at '46.com, and I greatly thank Simon and Chun along with their support staff for answering my emails so quickly. I must also state that they, themselves (e2046.com) is not the worskshop, but are simply retailers. However, I feel as though I should be fourtright in the expression of my experiences so that others may make wise choices. Myself? Will I doubt coming to '46.com for a FSS resin kit in the future? Yes, I have to say I would - but I still would be willing. But my overall experience is still a pleasant one.

Image


Vincent Valentine (CAN)

RT1324  Ryujinki
RT1324 Ryujinki
(0)

Such a beautiful kit. Sooo many details, a great action pose and every part is well cast.

Image


Alex
2004-05-10

RT0472 1/100 The Rune Mastquer Siegfried
RT0472 The Rune Mastquer Siegfried
(9.5)

Finally! It's here so I don't have to drool over the pics in the shop anymore. This one is TALL, folks. Will need a shelf on his own. Comes with a nice base (for balancing out his wings) and is very detailed. Once again: The photos don't do this fabulous kit any justice.

Image


Alex

RT1031 1/100 V-Siren 104P Prominence
RT1031 V-Siren 104P Prominence
(0)

MMS kit. come with soft rubber joints. Great kit.

Image


Neo_omega
2004-05-09

RT0024 1/100 Blue Knight
RT0024 Blue Knight
(9.7)

Great cast. Just like original.

Image


Neo_omega

RT1210  RGM-79C GM Kai
RT1210 RGM-79C GM Kai
(8.7)

This is actually my third kit from E2046, I just forgot to post about the other two. FAST shipping, really like the plastic boxes it's shipped in, and the parts are packed well. Nothing broken and a great mold....hardly any airholes. Pity it didn't come with decals...but I can live with that . Not sure on the paint job yet. I highly recommend the kit though, a nice kit in that "something different" range. Now, if only this one will come back in stock:RT1206 I will be a happy man.

Image


Asmenoth (USA)

RT0472 1/100 The Rune Mastquer Siegfried
RT0472 The Rune Mastquer Siegfried
(9.5)

This is one mean looking robot. I haven't been buying much in the way of mecha in a while, but this is outstanding. This kit comes in over 50 parts and should stand around 23 cm tall. The wings alone are huge. I know that plastic could NEVER have done this bad boy justice. Dramatic, and well sculpted. Anything with this many parts will eba challenge to build. But this will be a welcome challenge, and fun too! It will look great done and will look good in every display.

Image


baxojayz (USA)

RT0046 1/100 Horse Knight
RT0046 Horse Knight
(9.3)

So please that it had arrived!! What an awsome packing job!! I'm simply speech-less about the quality of the cast and services. THX and for sure be ordering more in the not so near future.

Image


leo7

[ Welcome Offer US$5 Rebate ] / [ Shortcut to VIP Membership ]