이용 후기 > 모든 후기
* 올려주시는 구매후기마다 행운추첨의 기회가 부여됩니다... 여러분의 생각을 올려주세요!
검색 결과 147126 개

카테고리

국가/지역

정렬

FG10797 1/6 Chieri Shiina
FG10797 Chieri Shiina
(9.8)

NICELY MADE, one piece trunk. Clothes are detachable.

Image


KAI (연합 왕국

FG10852  Wakker
FG10852 Wakker
(9.9)

Fits marvelously well, i really like this new white resin. Virtually ready-to-paint.

Image


max452 (프랑스

FG8871 1/7 Princess Mordina
FG8871 Princess Mordina
(9.5)

Great model, came intact. There's a lot of bits and pieces, chains and stuff. It will be a lot of fun getting it together.

Image


Tyko (스위스

FG10975 1/4 Kotone Sasaki Bunny Version
FG10975 Kotone Sasaki Bunny Version
(10)

Es mas grande de lo que pensaba. Detallada. Gracias

Image


Javier_mx (멕시코

FG11680 1/7 Bishoujo Fluttershy
FG11680 Bishoujo Fluttershy
(10)

Kam heile an, die Passform ist auch toll und freue mich schon darauf sie zu bauen.

Image


Skipper (독일

PV8769 1/6 Luna (PVC)
PV8769 Luna (PVC)
(9.9)

Genuinely surprised with how great it looks and how sturdy she is! Very happy with my purchase!!

Image


Iceberg37 (미국

PV9440 1/6 Fubin na Akuma Chan (PVC)
PV9440 Fubin na Akuma Chan (PVC)
(9)

I was quite pleased with this figure when it arrived. Packaging was pretty much perfect with no dents or defects and the figure itself didn't have any imperfections either. It did come with a much larger base then expected, but also a much higher quality one then the simple plastic disc from the pictures. I was initially concerned with the removable clothing as figures I have gotten in the past usually have issues with the clothing fitting properly or not quite being able to fully close at it's opening points. However this one fit very well overall and I had no issues removing or putting the outfit back on. The clothing itself is a full single piece so you can't partially remove it, but that wasn't an issue for me. It did also come with a spare slightly transparent clothing set as well for those interested. My only slight complaint is how brittle the wings felt. They are made of a fairly thin plastic that doesn't seem to allow for any slight flexibility to them. So when handling them and attaching them I was a bit nervous that they might break. Thankfully they didn't but I was being quite careful with them. Just a heads up to anyone interested in this figure though as it might be a bigger concern to others. Overall it is a very well made figure that came carefully packaged with great quality and well fitting parts.

Image


runner2 (미국

RT1189 1/100 MS-09R Rick Dom Parts Set
RT1189 MS-09R Rick Dom Parts Set
(9.4)

Dear Team, received the Dom kit in excellent condition. the packaging was perfect, safe and intact, as usual The resin parts were nicely cast, well detailed, with very little cleanup to do. Only one foot exhaust thruster was slightly deformed oval shape instead of round shape. Other than that, overall parts are great. Keep up the good work and thank you! Cheers, Ken

Image


Captain Kirk (말레이시아

FG6345  Nina Dolono-Spider Suit Ver.
FG6345 Nina Dolono-Spider Suit Ver.
(9.7)

Just finished cleaning it and oh boy...Thats going to be a complicated kit. While the cast i got was decently clean and didnt have too many mold lines, the sheer volume of straps on the arms and legs makes cleaning it tedious if you want to keep detail. The hardest part is the assembly of the arm, as all the bones dont have socket placement but fit loosely "kind of over here", and thats about it. Pinning is absolutely necessary here. I'd recommend glueing the entire arm together before painting, otherwise it would be very hard to control each part placement. Kit comes with nice brass parts and nails, however they dont replace the shoulder spikes which need to be either custom bent into shape, or hand made by yourself to replace the missing shapes. Not a big issue, but might be a problem for beginners. Lack of instructions also make it a bit hard to guess what goes where if you dont use photo referrence. Over all good fit however, crisp detail for the size of it. Good looking, unique kit, but one for experienced modellers. -1 on the grade for the rather simplistic replacement for the shoulder spikes though, bit of a shame there.

Image


Clayman8 (스위스

FG4788  Sanakan
FG4788 Sanakan
(9.7)

Finished clean Sanakan yesterday and despite the simplicity of the model, im very much looking forward to painting her. Sharp lines, minimal clean up (only place i had to work on longer than 2min was the right side of her ribs to remove a mold line) and no warping on any of the larger parts like the gun barrel or legs. Kit almost snap fits together in places and theres absolutely no gaps that need filling to make all the parts fit well. Kit also has minimal connection "dots" that help line up the parts to each other correctly.

Image


Clayman8 (스위스

FG4877 1/6 Oboro
FG4877 Oboro
(9.7)

Another quality cast with clean, sharp lines. 90% of the parts fit tight straight out of the box and barely require any cleaning, they also fit snug so the model holds together really well too. Extra sheer fabric is a big plus for the fishnet of the suit. No warping, very clean parts and easy to remove pouring spouts.

Image


Clayman8 (스위스

FG8029 1/6 Cyril
FG8029 Cyril
(9.9)

Model is really larger than it appears and very clean. Comes with optional parts for a semi-topless, open blouse as well. No warping despite the thin parts and everything fit very well. The mold of the SMG is particularly nice with sharp lines and fits her hand really well. Parts fit was very clean, the sides of the skirt will need a bit of filling as it comes in two parts but aside from this there's little work to do overall.

Image


Clayman8 (스위스

FG1370 1/6 Black Motoko Kneeling
FG1370 Black Motoko Kneeling
(9.3)

As always, near perfect mold and excellent fit with no barely any gaps. Clear visor was very well cast with only a single spout up to on the central area and was easy to clean. Despite the pose, the wrists and arms fit perfectly with no issues and very little clean up needed. Thighs needed a bit of rescribing on the panel lines between the 2 connections but thats all.

Image


Clayman8 (스위스

PF11755 1/7 M4 SOPMOD II (Pre-painted)
PF11755 M4 SOPMOD II (Pre-painted)
(10)

Item received in good condition. The screenshots here does not really do it justice, it looks better in reality. I think the pictures might have used too much flash.

Image


Cieluscian (싱가포르

FG3092 1/6 Angel Djibril
FG3092 Angel Djibril
(9.8)

I like this kit, it's cute. It has good resin and details. The fit is good with a few small gaps.

Image


Builder (미국