Caster

US$ 68.79 US$ 85.99 Risparmia 20%
Esclusivo
US$ 85.99
US$ 68.79
Pre Ordine
Disponibile US$ 81.69
Costo di Spedizione Posta Aerea US$ 22.53
Quantità
Numero Prodotto  FG6895
Altezza  28.00 cm
Peso   0.79 kg
Parti  49
Scala  1/6

Osservazioni

  • Richiesto Assemblaggio
  • Richiesta Pittura
  • Istruzioni Incluse
  • Servizio di attenzioni extra: Caricati in imbottiture extra, sicurezza garantita
  • Basetta non inclusa qui, potresti volerne acquistare una da Basette
  • Include il decalco degli occhi
  • Fogli di Decalcomanie Include
5 Stelle
11
4 Stelle
1
3 Stelle
0
2 Stelle
0
1 Stelle
0

9.8 / 10

Commento in Evidenza
Image
2016-09-30
Hemlock (Stati Uniti) Traduci

Very nice kit - was obviously designed as a garage kit from the get-go, meaning thicker sections and oversized keys to make up for the brittle nature of resin. Most parts dry fit together with little slop, and simple putty work will likely be required for seaming. The keys on the heavier sections are fine for locating the parts, but for the sash ends and the tail, metal rods will be needed to prevent the finished kit from breaking at the lightest touch. For the most part, the main model is an excellent kit - the only major fault is with the accessory. The center portion of the mirror is unevenly cast - while this wouldn't normally be an issue, the mirror's frame sections are made with a tongue and groove design, designed to fit around the center of the mirror, and the deviation in thickness is sufficient to prevent the parts from slipping together. Perhaps this can be fixed with a little heat, but it might need to be lapped flat. Knocked a point off for that and for some obscuring of the detail lines on the kimono, (probably due to the recast nature of the kit,) but overall an excellent kit - should be fun to assemble and paint.

Ultimissimo Commento
Image
2017-08-23
airbrushSamurai (Polonia ) Traduci

One of the biggest figures in my collection so far. No real issues with this one, her tail needs some work to close the gaps also the mirror thingy will most likely need some heat fitting to look good. I'm glad i decided to purchase her.

Image
2017-07-12
Manbearpig (Stati Uniti) Traduci

A nice kit of with lots of detail. Zero complaints with it.

Image
2017-05-31

sweet kit, nice fit and a good size when finished

[ Offerta di Benvenuto: Uno Sconto in Buoni Denaro di US5$ ] / [ Scorciatoria ad Abbonamento VIP ]