This is actualy very tiny kit for 1/6 scale. I am very dissapointed at the size. I recieved three kits at the same time. Two of them are 1/7 and this one suppost to be 1/6. There is some oversanded areas on her legs, but otherwise the cast is pretty good. This kit have removable clothing and some of the parts are thin but not too thin (just right).

Great packing, great quality, thanks! This kit feels so light, but she's a slight girl, so that's to be expected. I love that the new stickers on the containers hold together so much better... it makes peeling them off and moving them around much easier.

Hi again Kit came as always very well protected, resin quality is very good and casting is as usual, excelent, no bubbles and very sharp surfaces. major seamlines where sanded, thought no detail was lost. Sword is bended but that was expected because its so thin. Now onto figure. This little, delicate valkirie is pretty cute, but brave at the same time. Her scale should be quoted 1/9, that is much far from 1/6 XD ... nevermind, it is something that should be supposed by just looking at its quoted weight & height. Anyway, size doesn't made a figure beautiful, and this one is beutiful. As per building, to make her undress is quite a task with no point. Her dress is a tight fitting three pieces jacket, leaving it fixed will be much better looking. She is warrior striking with a big sword, why in the world would she be naked anyway?? I love these kits, wanna more of them! Thanks for your excelent store, products and service Smile Greetings

She arrived today Razz . Very nice figure looks really pretty. Almost no seem lines and nothing broke and no airbubbles, its a perfect cast. The figure is not very big for a 1/6 same scale as FG4035 1/6 Miyus. I would scale them as 1/7 or 1/8 maybe Surprised . But that also make these kits very cute

Kit arrived safely and well protected as usual. Casting is great! I've already started prepping and there is minimal putty needed. Her armor and skirt are a snug fit and the pose is very exciting. I can't wait to get her primed!

Hi Isaac I received this kit yesterday. The resin is of good quality. There appear to be a number of pin holes but they are univerally on the interior sides of the affected pieces. The short part of the sword has a wave in it but the long part is straight. All clothes pieces seem to join perfectly. Part Ten needed to be sanded down so it would not bind at part Nineteen (the inner dress front). Her front jacket won't close properly over the inner skirt without the sanding. I'm sure anyone could figure the parts out if they looked at them long enough but I made a partial diagram for fun because the proper position of the outer skirts confused me at first. You can see Satsuki in her partially assembled semi-nude swordgirl pose below.

I guess the first word is can say is..OMG why? Because This kit deserves 95% rating! The 5% missing will also be described below. This is my first order from this place. 5 days after the order is placed, the kit is on its way to Canada. I was expecting that it would arrive 14 days after the parcel is sent. Being evil minded I was kind of expected that there would be some parts in the kit could be damaged during the shipping process. But I guess I was awfully wrong. The kit arrived to Vancouver in 7 business day, and the whole kit is perfectly fine! I carefully checked every part, and I noticed that E2046 aren't any cheap scape on their product handling. All parts are nicely divided into many smaller bubble sheets in the box (which I couldn't do a better job than they did.) I SERIOUSLY like the photo that accompany with the kit as well (Nice photo paper there) because the I can clearly reference to the photo if I am having difficulties. The kit needs some touch up just like the other ones on the market but nothing too major EXCEPT of the following: 1.) the sword is bent ....yes it is bent, one side of the blade is not flat at all. I have no idea what happen during the process of molding. 2.) "I think" there are some details being damaged by the mold because a part in the kit is so small and partial of the panel line is being covered up . (Eg. I only get a half circle panel line instead of the full circle)

More Cerberus Project GK, after i got FG4034 1/6 Mihaotos from the same order last time. First, i need to make a general remark regarding these 3 kits (which are all from Cerberus Project, maybe concerns the other CP GK from the WF, still waiting for them), and that i didn't realized until today, i had to take my FG3819 1/6 Halloween Girl off her bag as a comparison (she's from Cerberus Project too) : All those recent GK are in no way 1/6. I came to realize it when i took Satsuki off her bag : she was really tiny, and nothing like the 1/6 i already had in my hands, although she's labeled 1/6. She's even tinier that Ciel or Mihaotos, which are already far from being 1/6. Ciel and Mihaotos are something like between 1/7 and 1/8, Satsuki being almost smaller than a 1/8. I don't mind these GK being tiny btw, i like them this way, just thought i should advertise it so that future buyers might know that they're not really 1/6 but a lot smaller. That thing said, let's hop to review. First, package was nice, nothing is broken, yadayada the usual. Second, resin quality of the 2 GK is as usual, very satifying, of the usual neat yellowish white, clean and all. Casting : All in all quite good, biggest seamlines have been dremel-removed without too much damage, usual pieces of flash that'll have to be chopped off, and as usual fiting is quite good except it'll ask for a good prep work to get the clothes to fit well (since like most CP GK they're cast-off GK, so getting the clothes right is the biggest challenge). Only bad point is the casting of the left boot of Ciel which is not really clean (lots of flash), and the laces will need a lot of very tiny prep work to get it right... All in all a good job, and more work for me when i'll be ready to make them at last...

Hi, FG4041 1/6 Satsuki Ikaruga arrived today , she was well packed and the casting/resin is almost perfect , hardly any seams , no air holes ect . This kit is not 1/6 scale , it is more like 1/8 scale . Thanks e2046 cheers Senyac